Psa Rapid Test Kit

Psa Rapid Test Kit is used to assist in the diagnosis of early prostate cancer. There are three methods for the PSA Rapid Test: detecting whole blood and serum, plasma samples. By quantifying the PSA concentration in these blood-derived samples, it becomes possible to identify abnormal changes during the early, symptom-free phase of prostate cancer. This capability not only helps screen individuals at potential risk but also allows for timely intervention measures. Additionally, for patients who have already been diagnosed with prostate cancer, regular PSA monitoring can support the assessment of treatment effectiveness and disease progression, thereby facilitating timely modifications to their therapeutic regimens.

For professional in vitro diagnostic use only.

Do not use after expiration date indicated on the package. Do not use the test if its foil pouch is damaged. Do not reuse tests.

Avoid cross-contamination of specimens by using a new specimen collection container for each specimen obtained.

Humidity and temperature can adversely affect results.

The used testing materials should be discarded in accordance with local, state and/or federal regulations.

Psa Rapid Test Kit should be stored at 2-30°C until the expiry date printed on the sealed pouch.

The test must remain in the sealed pouch until use. Do not freeze.

Cares should be taken to protect components in this kit from contamination. Do not use if there is evidence of microbial contamination or precipitation. Biological contamination of dispensing equipments, containers or reagents can lead to false results.

Allow the test device, urine specimen, and/or controls to equilibrate to room temperature (15‐30℃) prior to testing.

1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.

2. Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100 μL) to the specimen well (S) of the test device, and then start the timer. Avoid trapping air bubbles in the specimen well (S).

3. Wait for the red line(C) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.