MET Test

MET Test is specially designed for emergency screening scenarios, with core advantages including an ultra-short detection cycle and a convenient operation process. No professional laboratory equipment is required; simply collect a urine sample and add the reagents according to the instructions. Within 10 minutes, the result can be determined by the color development on the test line and control line. The judgment of negative or positive results is intuitive and clear, allowing non-professional personnel to operate it easily. The MET test uses highly specific antibody technology, which can accurately identify methamphetamine and its metabolites, effectively avoiding cross-reactions with other common drug components and ensuring the reliability of screening results. In addition, the kit comes in individually sealed packaging, which is both moisture-resistant and portable. Whether used for on-site emergency testing or routine stock screening, it can meet the needs for rapid response and provide immediate support in preventing the risk of methamphetamine abuse.

For professional in vitro diagnostic use only.

Do not use after expiration date indicated on the package. Do not use the MET Test if its foil pouch is damaged. Do not reuse tests.

Avoid cross-contamination of specimens by using a new specimen collection container for each specimen obtained.

Humidity and temperature can adversely affect results.

The used testing materials should be discarded in accordance with local, state and/or federal regulations.

The kit should be stored at 2-30°C until the expiry date printed on the sealed pouch.

The test must remain in the sealed pouch until use. Do not freeze.

Cares should be taken to protect components in this kit from contamination. Do not use if there is evidence of microbial contamination or precipitation. Biological contamination of dispensing equipments, containers or reagents can lead to false results.

Allow the test device, urine specimen, and/or controls to equilibrate to room temperature (15‐30℃) prior to testing.

1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.

2. Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100 μL) to the specimen well (S) of the test device, and then start the timer. Avoid trapping air bubbles in the specimen well (S).

3. Wait for the red line(C) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.